I'm throwing this out to the group for help. Anyone have any ideas on where to turn for new pumps? I need a new one for the mixing pump.
I checked on my grow this morning, and I noticed the time on the display said 4pm. I tried interacting with the control panel but I couldn't push any buttons - it was unresponsive no matter where I pushed.
I had to cycle boot the machine. This happened several times during my first grow and it really messed up my grow because it impacts the ability of the unit to follow the correct light schedule.
Is anyone working on getting this resolved? @BloomCS
Trying to test our posts
Hello I have decided id like to grow some fungi, mainly Enoki and Oyster. I would like to try and use the Bloom cabinet to provide the controlled environment. Is there a way to set parameters for humidity? The mushrooms need a more humid environment than what the bloom standard of 55%-65%.
Thanks for the wisdom,
WendallZ
Hello! I am trying to start a new grow, but am unable to download a recipe from the forum (trying to use the 'Autoflower Sativa' posted by Gr0w3r -- it shows as being downloaded on the unit but there is no recipe behind it). I've also tried entering the parameters from scratch and it does not save. Every recipe other than the sample recipes (I selected the 'Beefsteak Tomato recipe and that works) have a grow time of 0 (zero). System seems to be running fine. I reset/rebooted to no avail. Any ideas on next steps?
Hi from Chicago burbs... Looking forward to growing some great tomatoes.
Hello BLOOMers!
As I'm sure many of you have noticed, we are seeing some data issues between our BLOOMs and the cloud. This can impact recipe upload and download and limit what you can see from the APP, but should not impact the day to day running of your BLOOM garden.
Most of our BLOOM cloud development had been done with trusted long term partners in the Ukraine, Belarus and other countries now impacted by the crisis in the Ukraine. For security reasons, we ended relationships with contractors in those areas and are working hard to build expertise in safer zones. BLOOM is complex however, and so far we have not been able to move fast enough to keep all the wheels on all the time. We sincerely believe we will have this resolved soon, and thank you for your patience.
We are sorry for any frustration this downtime causes. We wanted to make sure you knew that we are aware of the issue, and let you know that we are working to get these issues resolved as soon as possible. If you have any other questions or concerns, please don't hesitate to reach out.
I can no longer connect to my Bloom from the IOS app. After logging in, I get the internet connection lost message in red at the top of the screen.
Also on the forum and the Bloom panel, I am unable to download recipes from the forum. repetitive loop back to the login screen despite being logged into the forum.
Anyone else having similar issues?
Dwarf sunflowers are GLOWING in my BLOOM! This is day 100, with florals opening about 10+ days ago. I plan on harvesting the blooms in a few weeks and putting out for the birds. 20220510_093734.jpeg
Hi BLOOMers!
We're learning lots, thanks to your help, and some urgent new firmware updates will be coming soon for your device. To upload them successfully, we need to make sure that you have updated your software to the latest version to prevent errors from occuring.
To Check What Software You Have:
Press on the Home icon Press on My Account Press on Status In the center block of items, scroll down until you see "FW/SW Version". The second version number should read v.1.1.93. If it shows v1.1.93, you do not need to do anything else. If it does not show v.1.1.93, you need to update your software. Follow the instructions below.To Update Your Software:
Press on the Home icon Press on Wi-Fi On the left, third button down should say Software Update. Press that and follow the prompts. Once it is updated and takes you back to the main screen, Press on the Home icon Press on My Account Press on Status In the center block of items, scroll down until you see "FW/SW Version". Confirm that the second version number reads v.1.1.93.Please let us know if there is anything further we can do to help by commenting below OR email us at customerservice AT bloomgrows.com
So this is the fourth attempt to grow some sweet Mary Jane. The first 3 times all ended tragically due to various kinks which have been worked out for the fourth attempt. Finally was able to track down an auto flower seed and used that grow recipe. FAA1CAE6-B1E4-4576-A416-3CEE3408E0E8.jpeg 40FE56A2-4BB6-4284-98DF-B2E5A4221D9F.jpeg 2014F2C7-5D86-4C25-B035-BF29590BA958.jpeg
I sent an email with an issue I'm having but it bounced back that the user has been deactivated. My worst nightmare after going through this with the Grobo!
@BloomCS are you still with us?
I cannot exit out of Edit Recipe on my control panel. I click every button possible, but it keeps saying fill in the missing information.
Hello I have decided id like to grow some fungi, mainly Enoki and Oyster. I would like to try and use the Bloom cabinet to provide the controlled environment. Is there a way to set parameters for humidity? The mushrooms need a more humid environment than what the bloom standard of 55%-65%.
Thanks for the wisdom,
WendallZ